Posts

Showing posts from August, 2016

BGP Path Attributes

BGP attributes are divided into : 1) Well-known mandatory : it must be recognized by all BGP implementation. Everyone supports them.                                            Mandatory attributes must be included in all BGP Update message ORIGIN AS-PATH NEXT_HOP 2) Well-known discretionay : may or may not be sent int a specific Update required to support the attribute LOCAL_PREF ATOMIC_AGGREGATE 3) Optional transitive : BGP process should accept the path in which transitive att is included, even if it                                     doesn't support and it should pass the path on to its peers AGGREGATOR COMMUNITY 4) Optional nontransitive : BGP process that doesn't recognize the attribute ...
Image
If you have error like this on your Cisco box : or your traceroutes take ages : According to cisco.com : Your router can be configured to use DNS lookups if you wish to use the ping or traceroute commands with a host name rather than an IP address. Use these commands to do so: Command Description ip domain lookup Enables DNS-based host name-to-address translation. This command is enabled by default. ip name-server Specifies the address of one or more name servers. ip domain list Defines a list of domains, each to be tried in turn. Note:  If there is no domain list, the domain name that you specified with the ip domain-name global configuration command is used.