CCNP ENCOR & ENARSI Study Path (free, 2026)
Start with forwarding and failure domains, build the routing foundations, then return to the same small topology with deliberate faults. This free reading path connects selected Network freak articles to the ENCOR and ENARSI study domains; it is an independent supplement, not a complete official course, an exam guarantee, or Cisco-affiliated training. Read the linked article, sketch its packet path, reproduce the example on equipment you are licensed to use, and record both the expected result and the failure evidence. Work through ENCOR first; use ENARSI to deepen troubleshooting rather than to skip the foundations. The 2026 title identifies this edition, not an exam version. Blueprint versions below were checked live on November 18, 2026; check Cisco again before booking.
Cisco ENCOR 350-401 v1.2: Architecture 15%, Virtualization 10%, Infrastructure 30%, Network Assurance 10%, Security 20%, and Automation and Artificial Intelligence 15%. [1] Official Cisco blueprint
Cisco ENARSI 300-410 v1.1: Layer 3 Technologies 35%, VPN Technologies 20%, Infrastructure Security 20%, and Infrastructure Services 25%. This is the July 2025 PDF linked by Cisco's live exam-topics page, not the older v1.1 PDF still available elsewhere. [2] Official Cisco blueprint
ENCOR Architecture
- Spine-Leaf and Clos Topology Explained for Network Engineers — Learn to draw leaf-to-spine packet paths and evaluate remaining uplink capacity after a failure.
- HSRP vs VRRP vs GLBP Explained: Preempt, Tracking and Failover — Learn how gateway roles, preemption and tracking differ across HSRP, VRRP and GLBP.
- QoS in Service Provider Networks: Design and Operations Guide — Learn to translate traffic requirements into classification, queueing and congestion-verification decisions, using provider-oriented examples as supplemental QoS context.
Coverage gaps / limits: Partial: campus tiers, Catalyst SD-WAN, SD-Access and SSO need additional study; the Clos article is fabric context, not a campus-design course.
ENCOR Virtualization
- VXLAN and Overlay Networks Explained for Interviews — Learn to separate VXLAN encapsulation, VNI membership and underlay reachability from EVPN control-plane learning.
- RD vs RT in MPLS L3VPN: Differences, Examples and Interview Answer — Learn why route distinguishers identify VPN routes while route targets control import eligibility, as background for understanding separate routing contexts.
- GRE Tunnel Basics Explained: Source, Destination and Tunnel Interface — Learn to distinguish a GRE tunnel's inner interface address from its outer source and destination and verify the underlay dependency.
- IPsec Phase 1 vs Phase 2 Explained: SAs, Crypto Maps and IKEv2 — Learn to distinguish IKEv1 negotiation and data security associations without incorrectly applying Phase 1 and Phase 2 terminology to IKEv2.
Coverage gaps / limits: Partial: hypervisors, virtual switches, LISP and hands-on VRF/GRE/IPsec configuration remain gaps; provider VPN policy is not VRF-Lite configuration.
ENCOR Infrastructure — Layer 2: VLANs, STP and EtherChannel
- Access Port vs Trunk Port vs Native VLAN Explained — Learn to separate access membership, trunk tagging, native VLAN behavior and the allowed VLAN list when tracing a frame.
- STP Root Bridge Election Explained: Priority, Bridge ID and MAC Address — Learn to elect the STP root from the bridge ID rather than confusing root election with path-cost selection.
- STP vs RSTP Port States and Roles Explained: Differences and Interview Answer — Learn how STP and RSTP states differ from port roles and what those distinctions mean during convergence.
- MSTP Region Parameters Explained: Name, Revision, VLAN Mapping and Digest — Learn which MST region attributes must match and why the configuration digest is derived from the VLAN mapping.
- BPDU Guard vs BPDU Filter vs Root Guard vs Loop Guard Explained — Learn to diagnose unexpected, superior or missing BPDUs by choosing the relevant guard mechanism instead of disabling STP protection.
- LACP EtherChannel Explained: Active vs Passive, Link Limits and Load Balancing — Learn why active/passive LACP can form a bundle but passive/passive cannot, and separate negotiation from flow distribution.
Coverage gaps / limits: Partial: complete dynamic-trunk and static/PAgP troubleshooting labs are still needed.
ENCOR Infrastructure — Layer 3: OSPF, EIGRP, BGP, redistribution, PBR and VRF
- How Does a Layer 3 Switch Decide Between Switching and Routing? — Learn why a frame addressed to the gateway enters routing while another frame on the same Layer 3 switch can remain bridged.
- Administrative Distance vs Metric vs Longest Prefix Match Explained — Learn to distinguish protocol path selection, administrative-distance route installation and longest-prefix packet forwarding.
- OSPF Network Types Explained: How They Work and Where They Break — Learn how OSPF network type changes DR election, adjacency expectations and the appearance of a Type 2 LSA.
- OSPF Cost and Reference Bandwidth: Fix Path Selection and Asymmetric Routing — Learn how reference bandwidth and directional interface cost affect OSPF path selection without promising symmetric return traffic.
- EIGRP Metric and K-Values Explained: Formula, Examples and Troubleshooting — Learn to calculate the classic EIGRP bandwidth-and-delay metric with the correct units and recognize K-value mismatch symptoms.
- BGP Best-Path Selection Explained: How Routers Choose a Route — Learn to test BGP path eligibility before comparing Cisco-style best-path attributes and platform-dependent tie-breakers.
- Route Redistribution Risks Between OSPF, EIGRP and BGP: Loops, Tags and Metrics — Learn why redistribution needs prefix limits, target-protocol metrics and route-tag rejection to prevent feedback across routing domains.
- NAT vs PAT vs Static NAT vs DNAT Explained with Packet Flow — Learn to distinguish address mapping, port translation and source-versus-destination rewriting in a packet walk.
- PIM-SM Explained: RP, Shared Tree, Source Registration and SPT Switchover — Learn how receiver joins, rendezvous-point discovery and shortest-path-tree switchover fit into a PIM-SM multicast flow.
Coverage gaps / limits: PBR: no suitable dedicated article selected. VRF: conceptual reading above, not configuration coverage. IPv6/OSPFv3 and timing services remain gaps. Redistribution below is ENARSI-oriented enrichment.
ENCOR Network Assurance
- Cisco SPAN Port Mirroring: Practical Guide for Troubleshooting — Learn to configure a local SPAN source and destination, choose capture direction and verify the monitor session before interpreting packets.
- OSPF Default Route Origination: Always, E1/E2 and IP SLA — Learn to separate OSPF default advertisement from upstream health and design an IP SLA tracking test that proves route withdrawal.
Coverage gaps / limits: Partial: Flexible NetFlow, ERSPAN, SNMP/syslog diagnostics, Catalyst Center and NETCONF/RESTCONF labs remain gaps.
ENCOR Security
- ACL Basics Explained: Standard vs Extended, Implicit Deny and Examples — Learn to predict an IPv4 ACL decision from match fields, entry order, attachment direction and implicit deny.
- Management Plane Security: Practical Guide for Network Engineers — Learn to inventory management paths and combine restricted sources, AAA roles, secure protocols and recoverable emergency access.
- DHCP Snooping vs DAI vs IP Source Guard: Differences and Interview Answer — Learn why DHCP snooping bindings, ARP inspection and IP Source Guard protect different stages of an IPv4 host's access traffic.
Coverage gaps / limits: Partial: device-access and CoPP configuration, API security, TrustSec/MACsec and security-design breadth need separate labs; IPv4 switch protection is supplemental.
ENCOR Automation
- Network Automation Workflow with Git and Ansible: Practical Guide for Data Center Engineers — Learn to move network intent through Git review, Ansible-generated changes and measured pre/post checks rather than treating configuration push as success.
Coverage gaps / limits: Partial: Python, JSON, YANG, Cisco APIs/response codes and EEM are not taught here; Git/Ansible is workflow context, not full blueprint coverage.
ENARSI Layer 3 technologies
- EIGRP Successor and Feasible Successor Explained: FD, RD and Feasibility Condition — Learn to apply EIGRP's strict reported-distance feasibility test without confusing the historical feasible distance with the current best metric.
- EIGRP Stuck in Active Explained: SIA Troubleshooting and Prevention — Learn to trace an EIGRP Query/Reply dependency chain and distinguish ordinary Active computation from Stuck in Active.
- OSPF Stuck in ExStart or Exchange: MTU and DBD Troubleshooting — Learn why Hellos can succeed while MTU checks or DBD negotiation prevent an OSPF adjacency from reaching Full.
- OSPF Stub vs Totally Stubby vs NSSA: Differences and Default Routes — Learn which LSA classes and default-route behaviors distinguish stub, totally stubby and NSSA designs.
- OSPF Summarization Explained: ABR area range, ASBR Summaries and Blackholes — Learn to choose an ABR area range versus an ASBR external summary and test whether a summary hides unreachable component subnets.
- OSPF Route Filtering Explained: Distribute Lists vs ABR Filter Lists — Learn why filtering route installation is different from filtering inter-area advertisements and why a rejected route can still have an LSA.
- BGP Active State Troubleshooting: TCP 179, Source IP and TTL — Learn to investigate BGP Active using the actual TCP endpoints, port 179, source address and TTL rather than relying on a successful ping.
- BGP Troubleshooting: Established but No Routes, RIB-Failure and Missing Advertisements — Learn to locate the first failed BGP handoff from received route through policy, RIB installation, forwarding and onward advertisement.
- BGP Filtering Explained: Prefix Lists, AS-Path Filters and Maximum-Prefix — Learn why prefix authorization, AS-path matching and maximum-prefix protection solve different BGP policy problems.
- Route Redistribution Risks Between OSPF, EIGRP and BGP: Loops, Tags and Metrics — Revisit redistribution with a troubleshooting goal: identify where a route re-enters its origin and verify rejection at every return boundary.
Coverage gaps / limits: Partial: PBR and VRF-Lite configuration, IPv6, EIGRP named mode/stubs/unequal-cost behavior, BFD and the full BGP/OSPF troubleshooting matrix remain gaps.
ENARSI VPN technologies
- MPLS PHP and LFIB Explained: Label Popping, Packet Flow and Verification — Learn to interpret MPLS PHP and the LFIB without mistaking implicit-null signaling for a label that appears on the wire.
- MPLS L3VPN Route Target Troubleshooting: Fix Missing VRF Routes Safely — Learn to trace a missing VPN route through CE learning, VRF export, MP-BGP transport and route-target import before widening segmentation policy.
Coverage gaps / limits: Partial: a complete single-hub DMVPN lab, including mGRE, NHRP and spoke-to-spoke verification, is missing; point-to-point GRE and IPsec foundations above are prerequisites, not DMVPN coverage.
ENARSI Infrastructure security
- uRPF Strict vs Loose Mode Explained: Asymmetric Routing and Interview Answer — Learn why strict uRPF can reject legitimate asymmetric traffic while loose mode checks source reachability without the same ingress-interface constraint.
- OSPF Authentication Explained: HMAC-SHA-256, Key Chains and Safe Migration — Learn to treat OSPF key-chain authentication changes as coordinated routing maintenance with verification and rollback rather than as encryption.
- Management Plane Security: Practical Guide for Network Engineers — Revisit management-plane design to identify the dependency between AAA access, allowed source paths and a tested break-glass route.
Coverage gaps / limits: Partial: IOS AAA fault isolation, IPv6 filters/first-hop security, time-based ACLs and CoPP troubleshooting remain gaps; OSPF authentication below supports the Layer 3 domain.
ENARSI Infrastructure services
- What Happens When a PC Boots on a Switched Network? DHCP, ARP and DNS Explained — Learn to separate link/VLAN readiness, DHCP address acquisition, next-hop ARP and application-triggered DNS when diagnosing host connectivity.
- Cisco Configuration Backup to TFTP: Practical IOS Guide — Learn how IOS archive and kron can trigger configuration backups, then verify reachability, naming and restore readiness while recognizing TFTP's lack of encryption.
- OSPF Default Route Origination: Always, E1/E2 and IP SLA — Revisit the IP SLA example to test tracked-default failure and recovery rather than accepting a healthy interface as proof of upstream service.
Coverage gaps / limits: Partial: full IPv4/IPv6 DHCP relay/server diagnosis, SNMP, logging/telemetry, IP SLA jitter, NetFlow/IPFIX and Catalyst Center Assurance need additional work; old TFTP examples require a trusted isolated lab.
Free tools
Practice alongside the reading path - all tools are free and run in your browser:
- IP Subnet Calculator (IPv4 & IPv6) - check every subnetting answer while you study addressing and summarization.
- OSPF Cost Calculator - verify interface and path cost with different reference bandwidths.
- BGP Best Path Simulator - walk through the Cisco IOS best-path order step by step.
- BGP Route Lookup - look up origin AS, AS paths and RPKI state for real prefixes.
- CCNP Practice Quiz (ENCOR & ENARSI) - test yourself after each section of this path.
- All free networking tools - the full list, all running in your browser.
Comments
Post a Comment