EVPN/VXLAN Anycast Gateway Drift: Fix Intermittent First-Hop Failures

EVPN/VXLAN anycast gateway drift is one of those fabric problems that looks random from the server side: a VM can ping outside its subnet for a few minutes, then traffic stalls, then it recovers after an ARP refresh or a host move. The underlay is clean, BGP EVPN is established, and the SVI IP is configured on both leaves. The real issue is usually smaller: the fabric no longer has one consistent first-hop gateway identity for that VLAN/VNI.

This article gives a practical checklist for finding and fixing anycast gateway MAC, ARP/ND, and EVPN route ownership drift without turning a troubleshooting session into a broad outage. For more related fabric notes, see the Data Center, AI Infrastructure, and Start Here pages.

X Follow @ipexptobe

BGP Route-Map Order Troubleshooting: Fix Policies That Match the Wrong Prefix

BGP route-map order troubleshooting is a small operational skill that prevents large routing surprises. A policy can look correct line by line, yet still produce the wrong result because an earlier sequence matched the route before the more specific rule was ever evaluated.

This is common on data center border leaves, internet edges, MPLS VPN handoffs and lab fabrics where engineers add a new exception to an existing policy. The neighbor comes up, prefixes are visible, but local preference, community tagging, route filtering or AS-path prepending does not behave as expected.

X Follow @ipexptobe

EVPN/VXLAN DHCP Relay Troubleshooting: Find Missing Leases Fast

EVPN/VXLAN DHCP relay troubleshooting is one of those operational tasks where the first packet capture often tells only half of the story. You may see the client broadcast leave the access VLAN, the relay agent forward it toward a central DHCP service, and still the host never receives an address.

The most useful way to debug it is to treat DHCP as a routed workflow across two planes: the local anycast gateway and relay behavior on the leaf, plus the EVPN control-plane state that lets the DHCP reply find its way back to the correct tenant subnet.

X Follow @ipexptobe

Monthly BGP Table Watch: Prefix and ASN Trends — August 2026

This monthly BGP Table Watch report summarizes how the public routing table changed over roughly the last 30 days, using the latest public Potaroo/CIDR Report samples available on 2026-09-01.

The goal is to provide a slower, more useful view than the daily snapshots: month-over-month prefix growth, IPv6 movement, visible ASN changes, and the route-churn areas worth watching.

X Follow @ipexptobe

LLDP/CDP Discovery for Network Automation: Prevent Wrong-Port Changes

LLDP and CDP discovery are often treated as nice-to-have operational data, but they can become a very practical safety net for network automation. Before a script, CI pipeline or AI-assisted workflow changes an interface, VLAN, port-channel or routing adjacency, it should know what is physically connected to that port right now.

This article shows a simple, vendor-neutral pattern for turning neighbor discovery into a lightweight source-of-truth check. It fits the Start Here networking topics, Data Center Networking and AI Infrastructure & Automation sections because cabling truth matters in data centers, branch networks and AI infrastructure clusters alike.

X Follow @ipexptobe

Weekly BGP Table Watch: IPv4, IPv6 and ASN Changes — 2026-08-31

The global BGP table keeps moving every day. This weekly BGP Table Watch snapshot tracks IPv4 prefixes, IPv6 prefixes, visible ASNs and the largest routing-table changes reported during the last week.

The goal is not to alarm on every change. BGP is noisy by design. The goal is to build a simple operational habit: watch the size of the routing table, notice large origin-AS changes, and keep an eye on where new ASNs and route withdrawals appear.

X Follow @ipexptobe

BFD Timer Design: Fast Failure Detection Without Flapping the Network

BFD timer design looks simple until a fast failure-detection feature starts creating the outages it was supposed to prevent. Bidirectional Forwarding Detection can remove the long wait for BGP, OSPF or IS-IS hold timers, but aggressive values on the wrong platform, underlay, WAN circuit or virtual appliance path can turn harmless jitter into control-plane churn.

This practical guide shows how to choose BFD timers for data center, service-provider and branch networks, how to connect BFD to routing protocols, and how to verify that the network is converging faster without flapping. It fits the broader Start Here networking topics, Data Center Networking and BGP Table Watch areas because BFD is usually a small command with a large blast radius.

X Follow @ipexptobe

EVPN/VXLAN ARP Suppression Troubleshooting: Fix Stale MAC/IP Bindings

EVPN/VXLAN ARP suppression troubleshooting is one of those data center tasks where the symptom can be misleading. A packet capture may show an ARP reply, the default gateway SVI may look up, and the BGP EVPN sessions may all be established, but the workload still cannot reach a peer in another rack. The reason is simple: ARP suppression moves part of first-hop discovery from flood-and-learn behavior into a distributed control-plane cache. If that cache contains a stale or incomplete MAC/IP binding, the fabric can answer confidently and still be wrong.

This article gives a practical workflow for diagnosing that situation without exposing any customer-specific details. It is written for EVPN/VXLAN fabrics using anycast gateways, distributed bridging/routing and BGP EVPN route type-2 advertisements. It also fits the broader Data Center Networking and AI Infrastructure & Automation topics, because GPU clusters, storage networks and virtualized platforms are especially sensitive to small fabric inconsistencies.

X Follow @ipexptobe

vPC Orphan Port Troubleshooting: Stop Single-Homed Hosts Breaking Maintenance

vPC orphan port troubleshooting matters because not every access port in a data center is safely dual-homed. A server, firewall leg, backup appliance, out-of-band bridge, migration host or temporary storage node may be connected to only one switch in a vPC/MLAG pair. Everything looks stable during normal operation, then a peer-link event, reload or access-policy mistake turns that single-homed port into the hidden outage.

The practical problem is simple: engineers often verify the port-channel and the peer link, but forget to verify the devices that are not in the port-channel. Those orphan ports need an explicit design decision: keep forwarding, suspend during split-brain risk, move to a standalone switch, or make them properly dual-homed.

X Follow @ipexptobe

AI-Assisted Network Change Review: Pre-Checks, Safe Diffs and Rollback

AI-assisted network change review is useful when it reduces boring human mistakes: missed route filters, wrong VRF names, unsafe ACL order, forgotten rollback commands or a change ticket that says “add one prefix” but touches ten devices. It is not useful when it becomes an untrusted black box pushing configuration into production.

The practical pattern is simple: let automation collect facts, let an AI assistant review the proposed change against those facts, and keep a human approval gate before deployment. This works especially well for data center fabrics, BGP edge policy, EVPN/VXLAN VRF changes and branch firewall updates where a small syntax error can become a wide outage.

X Follow @ipexptobe

Data Center Border Leaf Checklist: Connect EVPN/VXLAN Fabrics Without Route Leaks

Data center border leaf design is where a clean EVPN/VXLAN fabric can become operationally messy. Inside the fabric, tenants may be tidy: VNIs map to VRFs, anycast gateways are consistent, and route targets are predictable. At the edge, those same routes meet WAN routers, firewalls, internet edge devices, backup networks and sometimes legacy VLAN handoffs.

The problem is rarely one missing command. The usual failure is a weak handoff checklist: routes leak too widely, firewalls learn unexpected prefixes, asymmetric paths break stateful inspection, or a maintenance change imports a test VRF into production. This article gives a practical border leaf checklist that keeps the external edge boring.

X Follow @ipexptobe

AI Cluster Network Telemetry: What to Monitor Before RoCEv2 Jobs Fail

AI cluster network telemetry should answer one operational question quickly: is the training or inference job slow because of the application, storage, GPU scheduling, or the network fabric? In RoCEv2 and high-throughput Ethernet fabrics, waiting for a hard failure is too late. By the time users report idle GPUs, the useful evidence may already be spread across switch counters, NIC statistics, job logs and monitoring gaps.

This practical checklist focuses on signals that catch congestion, packet loss and unstable paths before they become a full incident. It is vendor-neutral on purpose: the exact commands change, but the telemetry model is reusable for leaf/spine data centers, AI infrastructure pods and lab environments.

X Follow @ipexptobe

Weekly BGP Table Watch: IPv4, IPv6 and ASN Changes — 2026-08-24

The global BGP table keeps moving every day. This weekly BGP Table Watch snapshot tracks IPv4 prefixes, IPv6 prefixes, visible ASNs and the largest routing-table changes reported during the last week.

The goal is not to alarm on every change. BGP is noisy by design. The goal is to build a simple operational habit: watch the size of the routing table, notice large origin-AS changes, and keep an eye on where new ASNs and route withdrawals appear.

X Follow @ipexptobe

BGP Max-Prefix and Prefix-Limit: Stop Route Leaks Before They Take Down Peering

BGP max-prefix and vendor-specific prefix-limit features are simple controls that prevent a small mistake from becoming a route-leak outage. They are not a replacement for route policy, but they are one of the fastest guardrails to deploy on internet edge, partner, WAN, route-reflector and data-center border sessions.

The practical question is not “should we configure a limit?” It is “what number should we use, where should the session shut down, and how do we avoid making troubleshooting worse during an incident?” This article gives a safe workflow you can apply to eBGP and iBGP neighbors without publishing real customer details.

X Follow @ipexptobe

Network freak Weekly Roundup: 2026-W35

This is the weekly Network freak roundup for 2026-W35. It collects the latest practical networking articles published this week, so the X feed can stay quiet while readers still get all links in one place.

EVPN/VXLAN Silent Host Troubleshooting: Fix Missing MAC/IP Routes Safely

EVPN/VXLAN silent host troubleshooting is a common data-center problem: the fabric looks healthy, BGP EVPN sessions are up, VNIs are present, but one server, VM, storage node or appliance cannot be reached until it sends traffic first.

The usual cause is not “VXLAN is broken”. It is missing or stale endpoint state: the remote leaf does not have a usable MAC/IP binding, ARP/ND suppression answers from the wrong cache entry, or BUM flooding is constrained so discovery never reaches the quiet host.

X Follow @ipexptobe

EVPN/VXLAN MTU Troubleshooting: Why Ping Works but Applications Fail

MTU bugs in an EVPN/VXLAN fabric are frustrating because the control plane usually looks healthy. BGP EVPN is established, VNIs are present, MAC/IP routes are learned, and a normal ping may work. Then a backup job, storage mount, database replication stream or RoCEv2 workload starts moving real payloads and traffic becomes intermittent.

The root cause is often simple: one link, port-channel member, routed subinterface, firewall hop, DCI handoff or host interface cannot carry the larger encapsulated frame. This article gives a practical workflow to prove or eliminate MTU as the issue without guessing.

X Follow @ipexptobe